The DSE9470 MKII is a UL recognised intelligent switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections. 

KEY FEATURES

• UL Recognised.

• Intelligent three & four stage charging profiles.

• 12 volt & 24 volt configurable.

• Configurable for use as a 5 amp or 10 amp chargers.

• Adjustable current limit.

• Battery charger & power supply.

• Manual & automatic boost.

• Digital microprocessor technology.

• Battery charging temperature compensation.

• Low output ripple/excellent line regulation.

• Customisable charging curves.

• AC input under/over voltage.

• Battery charger over voltage protection.

• Battery charger over current protection.

• Battery under voltage alarm.

• Auto battery detection.

• Auto self-test function.

• Output short circuit and inversion polarity with auto recovery.

• Auto power de-rating at high ambient temperatures.

• Optional battery temperature compensation using a PT1000 temperature sensor.

• Cell charge boost and equalizing.

• External system integration via MODBUS RTU using RS485.

• DSE Configuration Suite PC Software.

• External remote display option (DSE2541).

• 86% operating efficiency.

• Configurable soft-start feature using DSE Configuration Suite software.

• View remaining charge time via SCADA.

• Digital input within SCADA.

• Configurable bulk to absorption transition.

• Li-ion charging profile.

• Auto voltage detection detects if a 12V or 24V battery is connected.

• Password protection.

• Configurable temperature shutdown.

• Configurable mains relay functionality.

• Lead crystal charging profile.

• Deep sleep mode.

• Battery health check

• PSU mode.

• Battery voltage sensing (Down to 1 volt).

• SCADA digital input status.

• Max current mode.

• New gencomm registers.